Giardia (GIA) is a common intestinal parasitic protozoan that is susceptible to both humans and pets. Giardia is most commonly found in dogs and occasionally in cats.
This kit is used for the detection of Giardia antigen in the feces of canine and feline, and can be used for the screening and auxiliary diagnosis of Giardia infection in canine and feline.

Test principle of the GIA-Ag Test Kit

This product uses rapid immunochromatography technology to detect Giardia antigen in the feces of canine and feline. After the diluted sample was dropped into the sample well, if there was GIA antigen in the sample, it would specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by GIA antibody coated on the membrane, showing a Burgundy line on the detection line (T). If the GIA antigen is not present in the sample, no visible lines are formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Sample Requirements

1. Please refer to the instructions for use
2. This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
3. Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
4. If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appear next to “C”.
Positive: In the test window, two distinct colored lines appear next to “T” & “C” simultaneously.
Invalid: No color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Canine rotavirus is highly resistant to commonly used disinfectants and can survive for months in feces. The specific symptoms of infected canine rotavirus are highly dependent on their age.

This kit detects canine rotavirus antigen in dog feces or vomit and is used for screening and auxiliary diagnosis of canine rotavirus infection.

Test principle of the CRV-Ag Test Kit

This product uses a rapid immunochromatographic technique for the detection of canine rotavirus antigens in canine feces or vomit. If there is CRV antigen in the sample, it will specifically bind to the recombinant protein labeled with colloidal gold to form a complex that will move along the chromatographic membrane and be captured by the CRV antibody coated on the membrane, showing a wine red line on the detection line (T). If the CRV antigen is not present in the sample, no visible line is formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Sample Requirements

1. Please refer to the instructions for use
2. This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
3. Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
4. If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appear next to “C”.
Positive: In the test window, two distinct colored lines appear next to “T” & “C” simultaneously.
Invalid: No color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Infectious canine hepatitis (ICH) is an acute, septic infectious disease caused by the canine hepatitis virus and characterized by hemorrhagic gastroenteritis, circulatory disturbance, centrilobular necrosis, and intranuclear inclusion bodies in liver parenchyma and endothelial cells.

This kit detects hepatitis antigens in canine fece, mouth, eye, and nose secretions and is used for screening and auxiliary diagnosis of canine hepatitis infection.

Test principle of the ICH-Ag Test Kit

This product uses rapid immunochromatography technology to detect canine hepatitis antigen in canine fece, mouth, eye and nose secretions. If ICH antigen is present in the sample, it will specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moves along the chromatographic membrane and is captured by the ICH antibody coated on the membrane, showing a wine red line on the detection line (T). If there is no ICH antigen in the sample, no visible lines will form at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Sample Requirements

1. Please refer to the instructions for use
2. This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
3. Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
4. If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appear next to “C”.
Positive: In the test window, two distinct colored lines appear next to “T” & “C” simultaneously.
Invalid: No color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Feline Infectious Peritonitis FIP belongs to the family Coronaviridae and the genus Coronavirus.

This kit can be used to detect feline infectious peritonitis antibody in feline blood or serum, and can be used for feline AIDS infection screening and auxiliary diagnosis.

Test principle of the Feline FIP-Ab Test Kit

This product uses a rapid immunochromatographic technique for the detection of antibodies to feline infectious peritonitis in feline whole blood or serum. If the FIP antibody was present in the sample, it would bind specifically to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the FIP antigen coated on the membrane, showing a wine red line on the detection line (T). If the FIP antibody is not present in the sample, no visible line is formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Sample Requirements

1. Please refer to the instructions for use
2. This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
3. Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
4. If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”
Invalid: no color line visible next to “C”

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Canine Parvovirus (CPV) belongs to the Parvoviridae family, the genus Parvovirus. Canine parvovirus is highly resistant to commonly used disinfectants and can survive in feces for months to years. Canine parvovirus is highly contagious and can be infected by dogs of different ages, genders and breeds, especially juvenile puppies.

Dogs infected with canine parvovirus have acute onset and high mortality. Clinical manifestations are vomiting and diarrhea. This kit detects parvovirus antibodies by detecting canine whole blood, serum or plasma.

Test principle of the CPV-Ab Test Kit

The kit is made by the principle of colloidal gold immunochromatography. After the sample is added to the sample hole, it moves along the chromatographic membrane together with the colloidal gold marker. If there is CPV antibody in the sample, the detection line will display purple-red. If there is no CPV in the sample Antibodies do not produce a color reaction.

The Canine Parvovirus test kit is able to detect Canine Parvovirus antigen concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only. And the quantitative results are trackable.

Intend Use

For rapid screening of Canine Parvovirus in canine whole blood, serum, or plasma (CPV).

Sample Requirements

1. This Canine Adenovirus Antigen Test Kit is only suitable for testing canine whole blood, serum or plasma samples.
2. The sample for the test must be collected immediately, the sample should be put into the dilution solution immediately after sampling, and the diluted sample should be tested as soon as possible, within 1 hour.
3. Diluted samples can be stored at 2-8°C for 24 hours and can be stored at -20°C for one month.

How to Use Canine Parvovirus Antibody Test Kit

1. Collect dog whole blood, serum or plasma samples, add the samples to the diluent after collection, tighten the lid, and mix by inversion.
2. Tear open the aluminium foil bag of the test card, take out the test card, and put it on a flat and clean table.
3. Pipe 3 drops of sample solution (about 80μL), and add to the sample well of the test card.
4. Read test results within 10-15 min at room temperature, and those results beyond 20 min are invalid.

Note: The above reading time is conducted at the room temperature of 15-30℃. If the temperature is lower than 15℃, the reading time should be extended. If the temperature is higher than 30℃, the reading time should be shortened.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”.
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”.
Invalid: no color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Interpretation of Test Results

1. The negative test results indicate the absence of canine parvovirus antibody in the samples. The infection cannot be ruled out if the corresponding acute symptoms occur.
2. The test results were positive, indicating samples containing canine parvovirus antibody
3. Multiple reasons may cause invalid results and should be re-tested.

Limitations of Canine Parvovirus Antibody Test Kit

• This kit can only detect the presence of canine parvovirus antibody in the samples examined.
• The test results are for clinical reference only and are not the basis for diagnosis.

Canine adenovirus (CAV) is the most pathogenic of the mammalian adenovirus genus. There are two serotypes. Type I can cause both canine infectious hepatitis (an acute septic infectious disease characterized by central necrosis of the liver lobules, the appearance of inclusion bodies in the nuclei of liver parenchymal cells and cortical cells, and prolonged hemorrhage.) It can also cause fox encephalitis, so it is also called fox encephalitis and canine infectious hepatitis disease. Type II can cause canine infectious laryngotracheitis and enteritis. The Canine Adenovirus Antigen Test Kit is used to detect canine adenovirus antigens in canine eye secretions, nasal fluid, and saliva.

Test principle of the CAV-Ag Test Kit

The Canine Adenovirus Antigen Test Kit uses a rapid immunochromatographic assay to detect canine adenovirus antigens. You add a sample of your dog’s eye discharge, nasal fluid, or saliva to the spiking well of the test strip and move it along the chromatographic membrane with a colloidal gold-labeled anti-CAVt monoclonal antibody. If the CAV antigen is present in the sample, it will show red when bound to the antibody on the detection line. No color reaction is produced if the CAV antigen is not present in the sample.

The Canine Adenovirus Antigen Test Kit is able to detect Canine Adenovirus antigen concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Canine Adenovirus in canine eye secretions, nasal fluid, saliva and vomit. (CAV).

Sample Requirements

1. This Canine Adenovirus Antigen Test Kit is only suitable for testing eye secretions, nasal fluids, and saliva samples from dogs.
2. The sample for the test must be collected immediately, the sample should be put into the dilution solution immediately after sampling, and the diluted sample should be tested as soon as possible, within 1 hour.
3. Diluted samples can be stored at 2-8°C for 24 hours and can be stored at -20°C for one month.

How to Use Canine Adenovirus Antigen Test Kit

1. Disposable swabs were used to collect samples of eye secretions, nasal fluids, and saliva from the dogs, and then the swabs were placed in the diluted solution and mixed and left to stand for 1 minute. Remove the swab, tighten the cap, and turn the sample tube upside down to mix.
2. Tear open the aluminium foil bag of the test card, take out the test card, and put it on a flat and clean table.
3. Pipe 3 drops of sample solution (about 80μL), and add to the sample well of the test card.
4. Read test results within 10-15 min at room temperature, and those results beyond 20 min are invalid.

Note: The above reading time is conducted at the room temperature of 15-30℃. If the temperature is lower than 15℃, the reading time should be extended. If the temperature is higher than 30℃, the reading time should be shortened.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”.
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”.
Invalid: no color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Interpretation of Test Results

1. The negative test results indicate the absence of canine adenovirus antigen in the samples. The infection cannot be ruled out if the corresponding acute symptoms occur.
2. The test results were positive, indicating samples containing canine adenovirus.
3. Multiple reasons may cause invalid results and should be re-tested.

Limitations of Canine Adenovirus Antigen Test Kit

• This kit can only detect the presence of canine adenovirus antigen in the samples examined.
• The test results are for clinical reference only and are not the basis for diagnosis.

Canine parvovirus (CPV) belongs to the family Parvoviridae, genus Parvovirus. Canine parvovirus is highly resistant to commonly used disinfectants and can survive in the feces for months to years. Canine microviruses are highly contagious and can infect dogs of different ages, sexes and breeds, and are particularly likely to infect underage puppies. Canine microvirus infection in dogs has a rapid onset and high mortality rate. The clinical manifestations are vomiting and diarrhea. The Canine Parvovirus Antigen Test Kit detects canine microvirus antigens in dogs’ feces, rectum, and vomit.

Test Principle of the Canine Parvovirus Antigen Test Kit

Rapid immunochromatographic assay technique for the detection of canine cerebrospinal virus antigen. A rectal or fecal sample is obtained and added to the spiked wells and then moved along the chromatographic membrane with a colloidal gold-labeled anti-CPV monoclonal antibody. If the CPV antigen is present in the sample, it binds to the antibody on the test line and appears burgundy. If the CPV antigen is not present in the sample, no color reaction is produced.

The Canine Parvovirus Antigen Test Kit is able to detect Canine Parvovirus antigen concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Canine Parvovirus in the canine eye and conjunctival secretions, nasal fluid, saliva, feces, rectum, and vomit. (CPV).

Sample Requirements

1. This kit is only suitable for testing canine fecal, rectal and vomit samples.
2. The test sample is collected fresh and put into dilution solution immediately, and the diluted sample should be tested as soon as possible within 1 hour.
3. If the sample cannot be tested in time, the diluted sample can be stored at 2-8℃ for 24 hours and -20℃ for 1 month.

How to Use CPV-Ag Test Kit

1. Disposable swabs were used to collect samples of canine feces, rectum, and vomit. After collection, the samples were put into the dilution solution and stirred, left for 1 min, removed the swabs, tightened the lid, and mixed upside down.
2. Tear open the aluminum foil bag of the test card, remove the test card and place it on a flat, clean counter top.
3. Pipette 3 drops (about 80 μl) of the diluted sample into the spiked well of the test card and wait for the test result.
4. Wait for 10-15 min at room temperature to read the test results, after 20 min the test results are invalid.

Note: The above reading time is conducted at a room temperature of 15-30℃. The reading time should be extended if the temperature is lower than 15℃. If the temperature is higher than 30℃, the reading time should be shortened.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”.
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”.
Invalid: no color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Interpretation of Test Results

1. The negative test results indicate the absence of the canine parvovirus in the samples. The infection cannot be ruled out if the corresponding acute symptoms occur.
2. The test results were positive, indicating samples containing feline panleukopenia virus.
3. Multiple reasons may cause invalid results and should be re-tested.

Limitations of Canine Parvovirus Antigen Test Kit

• This kit can only detect the presence of canine parvovirus antigen in the samples examined.
• The test results are for clinical reference only and are not the basis for diagnosis.

Feline distemper, also known as feline panleukopenia, is an acute feline disease with a high degree of contact contagion. The causative agent is feline microvirus (FPV), which mainly infects cats, both domestic and wild felines, and is highly contagious with rapid onset and high mortality. You can test your cat for the disease with the feline panleukopenia virus antibody test kit.

The main manifestations of feline distemper are fever, leukopenia, vomiting and hemorrhagic enteritis. This Feline Panleukopenia Virus Antibody Test Kit is used to detect antibodies to feline microvirus in whole blood, serum or plasma of cats.

Test Principle of the Feline Panleukopenia Virus Antibody Test Kit

Test principle of the Feline Panleukopenia Virus Antibody Test Kit uses a rapid immunochromatographic detection technique for the detection of antibodies to feline fever virus. A sample obtained from cat whole blood, serum or plasma is added to the spiked wells and moved along the chromatographic membrane together with colloidal gold-labeled FPV antigen. If FPV antibodies are present in the sample, they bind to the antigen on the detection line (T) and show a burgundy color. If FPV antibodies are not present in the sample, no color reaction is produced.

The Feline Panleukopenia Virus Test Kit is able to detect Feline Panleukopenia Virus antibody concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Feline Panleukopenia Virus in feline whole blood, serum, or plasma. (FPV).

Sample Requirements

1. The Feline Panleukopenia Virus Antibody Test Kit is only suitable for testing cat whole blood, serum or plasma samples.
2. Test samples Collect fresh samples and put them in the diluent immediately. The diluted samples should be tested as soon as possible within 1 hour.
3. If the test cannot be performed in time, whole blood, serum or plasma samples can be stored at 2-8°C for 3 days and serum or plasma samples can be stored at -20°C for 1 month.

How to Use FPV-Ab Test Kit

1. Use disposable cotton swabs to collect cat whole blood, serum or plasma, add the sample to the diluent after collection, tighten the cap, and mix upside down.
2. Tear open the aluminium foil bag of the test card, remove the test card and place it on a flat, clean countertop.
3. Pipette 3 drops (about 80 μl) of the diluted sample into the spiked well of the test card and wait for the test result.
4. Wait for 10-15 min at room temperature to read the test results. After 20 min the test results are invalid.

Note: The above reading time is conducted at a room temperature of 15-30℃. The reading time should be extended if the temperature is lower than 15℃. If the temperature is higher than 30℃, the reading time should be shortened.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”.
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”.
Invalid: no color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Interpretation of Test Results

1. The negative test results indicate the absence of the feline panleukopenia virus in the samples. The infection cannot be ruled out if the corresponding acute symptoms occur.
2. The test results were positive, indicating samples containing feline panleukopenia virus.
3. Multiple reasons may cause invalid results and should be re-tested.

Limitations of Feline Panleukopenia Virus Antibody Test Kit

• This kit can only detect the presence of canine distemper virus antigen in the samples examined.
• The test results are for clinical reference only and are not the basis for diagnosis.

Feline culexvirus (FCV) belongs taxonomically to the family Culexidae and genus Culex. The virus multiplies in the brain plasma, sometimes in a crystalline or bead-like arrangement. The virus is resistant to lipid solvents (ether, chloroform and deoxycholines); inactive at pH 3, stable at pH 4-5; inactivated at 50 degrees C for 30 minutes. The main manifestations are upper respiratory signs, i.e. mental depression, plasma and mucous rhinorrhea, conjunctivitis, stomatitis, tracheitis, and bronchitis with biphasic fever. Feline cupulovirus infection is a frequent disease in cats with high morbidity and low mortality. This feline calicivirus antigen test kit is used to detect feline culexvirus antigen in feline ocular, nasal and oral secretions.

Test principle of the Calicivirus Antigen Test Kit

Rapid immunochromatographic assay technique for detection of feline culexvirus antigen. A sample obtained from the cat’s ocular, nasal and oral secretions is added to the spiked wells and moved along the chromatographic membrane together with a colloidal gold-labeled anti-FCV monoclonal antibody. If the FCV antigen is present in the sample, it binds to the antibody on the detection line (T) and shows a burgundy color. If FCV antigen is not present in the sample, no color reaction is produced.

The Feline Calicivirus Antigen Test Kit is able to detect Feline Calicivirus Antigen concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Feline Calicivirus in ocular, nasal and oral secretions of cats. (FCV).

Sample Requirements

1. The TOXO-Ag Test Kit is only suitable for testing cat eye, nose and mouth secretion samples.
2. The test sample is collected fresh and immediately put into the dilution solution. The diluted sample should be tested as soon as possible within 1 hour.
3. If the sample cannot be tested in time, the diluted sample can be stored at 2-8℃ for 24 hours and -20℃ for 1 month.

How to Use FCV-Ag Test Kit

1. Use disposable cotton swabs to collect cat eye, nose and mouth secretion samples, put the samples into diluent and stir, stand still for 1min, take out the cotton swabs, tighten the lid, and mix upside down.
2. Tear open the aluminium foil bag of the test card, remove the test card and place it on a flat, clean countertop.
3. Pipette 3 drops (about 80 μl) of the diluted sample into the spiked well of the test card and wait for the test result.
4. Wait for 10-15 min at room temperature to read the test results. After 20 min the test results are invalid.
5. Note: The above reading time is at room temperature 15-30℃, if the temperature is lower than 15℃, the reading time should be extended appropriately; if the temperature is higher than 30℃, the reading time should be shortened appropriately.

Note: The above reading time is conducted at a room temperature of 15-30℃. If the temperature is lower than 15℃, the reading time should be extended. If the temperature is higher than 30℃, the reading time should be shortened.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”.
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”.
Invalid: no color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Interpretation of Test Results

1. The negative test results indicate the absence of feline calicivirus in the samples. The infection cannot be ruled out if the corresponding acute symptoms occur.
2. The test results were positive, indicating samples containing feline calicivirus.
3. Multiple reasons may cause invalid results and should be re-tested.

Limitations of Calicivirus Antigen Test Kit

• This kit can only detect the presence of feline calicivirus antigen in the samples examined.
• The test results are for clinical reference only and are not the basis for diagnosis.

Feline distemper, also known as feline panleukopenia and feline infectious enteritis, is an acute, highly contagious disease of cats. Clinical manifestations are characterized by sudden onset of high fever, intractable vomiting, diarrhea, dehydration, circulatory disturbances, and a dramatic decrease in white blood cells.
The virus can infect not only domestic cats but also other felines. Cats of all ages can be infected. In most cases, cats under 1 year of age are susceptible, with an infection rate of up to 70% and a mortality rate of 50%-60%, and a maximum mortality rate of 80%-90% in kittens under 5 months of age. This kit is used to detect feline microvirus antigens in feces and vomit of cats.

Test principle of the FPV -Ag Test Kit

The Feline Panleukopenia Virus Antigen Test Kit uses a rapid immunochromatographic detection technique for the detection of feline fever virus antigen. A sample obtained from cat feces and vomit is added to the spiked wells and moved along the chromatographic membrane together with a colloidal gold-labeled anti-FPV monoclonal antibody. If the FPV antigen is present in the sample, it binds to the antibody on the detection line (T) and shows a burgundy color. If FPV antigen is not present in the sample, no color reaction is produced.

The Feline Panleukopenia Virus Antigen Test Kit is able to detect Feline Panleukopenia Virus Antigen concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Feline Panleukopenia Virus in feces and vomit of cats. (FPV).

Sample Requirements

1. The FPV-Ag Test Kit is only suitable for testing cat feces and vomit samples.
2. The test sample is collected fresh and immediately put into the dilution solution. The diluted sample should be tested as soon as possible within 1 hour.
3. If the sample cannot be tested in time, the diluted sample can be stored at 2-8℃ for 24 hours and -20℃ for 1 month.

How to Use Feline Panleukopenia Virus Antigen Test Kit

1. Use disposable cotton swabs to collect cat feces and vomit samples, put the samples into diluent and stir, stand still for 1min, take out the cotton swabs, tighten the lid, and mix upside down.
2. Tear open the aluminium foil bag of the test card, remove the test card and place it on a flat, clean countertop.
3. Pipette 3 drops (about 80 μl) of the diluted sample into the spiked well of the test card and wait for the test result.
4. Wait for 10-15 min at room temperature to read the test results, after 20 min the test results are invalid.
5. Note: The above reading time is at room temperature 15-30℃, if the temperature is lower than 15℃, the reading time should be extended appropriately; if the temperature is higher than 30℃, the reading time should be shortened appropriately.

Note: The above reading time is conducted at a room temperature of 15-30℃. If the temperature is lower than 15℃, the reading time should be extended. If the temperature is higher than 30℃, the reading time should be shortened.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appears next to “C”.
Positive: In the test window, two distinct colored lines appear simultaneously next to “T” & “C”.
Invalid: no color line visible next to “C”.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Interpretation of Test Results

1. The negative test results indicate the absence of feline panleukopenia virus antigen in the samples. The infection cannot be ruled out if the corresponding acute symptoms occur.
2. The test results were positive, indicating samples containing feline coronavirus.
3. Multiple reasons may cause invalid results and should be re-tested.

Limitations of Feline Panleukopenia Virus Antigen Test Kit

• This kit can only detect the presence of canine distemper virus antigen in the samples examined.
• The test results are for clinical reference only and are not the basis for diagnosis.